Diffuse Reflection Photoelectric Sensor

Housing size

50*50*18mm

Mode

Diffuse reflection

SN

50cm 100cm(adjuster)

Light source

Infrared LED 880nm

Output

NPN/PNP NO+NC

Power supply

10-30VDC

Response time

Max 3ms

Repeat accuracy

5%

Load current

200mA

Residual voltage

2.5V

Consumption current

25mA

Protection circuit

Surge ,reverse polarity and short-circuit

Indicator

Yellow LED

Ambient temp.

-15-55

Ambient RH

35-95%

Protection degree

IP65

Housing material

ABS/PC

Connection

PVC Cable

Housing size [mm]

M18*63

Thread size [mm]

M18*1*45

Mode

Diffuse reflection

SN [mm]

100mm,400mm

Light source

Infrared LED 880nm

Output

NPN/PNP NO/NC

Power supply

10-30VDC

Protection degree

IP67

Response time

Max 8.2ms

Hysteresis

3-20%

Repeat accuracy

5%

Load current

200mA

Residual voltage

2.5V

Consumption current

25mA

Protection circuit

Surge, reverse polarity and short-circuit

Indicator

Yellow LED

Ambient temp.

-15-55

Ambient RH

35-95%

Housing material

Nickel-copper Alloy/ABS/PC

Connection

PVC Cable 2m

type

Thru-beam

Retrorefective

Diffuse reflective

Thru-beam

Narrow beam

With polarizing filters

For transparent object sensing

Long sening range

Sensing range

10m

5m

0.1 to 3m

50mm to 1,000mm

800mm

300mm

Sening object

 12 mm or more opaque object

opaque, translucent or transparent object

Hysteresis

--

15 % or less of operation distance

Repeatability (perpendicular to sensing axis)

0.5 mm or less

0.05 mm or less

0.5 mm or less

1 mm or less

Supply voltage

10 to 30 V DC 10 % Ripple P-P 10 % or less

Current consumption

Emitter: 30 mA or less Receiver: 30 mA or less

30 mA or less

Emitter: 30 mA or less Receiver: 30 mA or less

Sensing output

NPN output type: NPN open-collector transistor Maximum sink current: 100 mA Applied voltage: 30 V DC or less (between sensing output and 0 V) Residual voltage: 1.5 V or less (at 100 mA sink current) 0.4 V or less (at 16 mA sink current)
PNP output type: PNP open-collector transistor Maximum source current: 100 mA Applied voltage: 30 V DC or less (between sensing output and V) Residual voltage: 1.5 V or less (at 100 mA source current)

Utilization category

DC-12 or DC-13

Output operation

Switchable either Light-ON or Dark-ON

Short-circuit protection

yes

Response time

1 ms or less

Operation indicator

Red LED (lights up when the sensing output is ON)

Stability indicator

Green LED (lights up under stable light received condition or stable dark condition)

Power indicator

Red LED (lights up when the power is ON)

Sensitivity adjuster

Continuously variable adjuster

Automatic interference prevention function

0

Incorporated (Two units of sensors can be mounted close together).

0

Incorporated (Two units of sensors can be mounted close togethe).

Environmental resistance

Pollution degree

3 (Industrial environment)

Protection

IP67 (IEC)

Ambient temperature

-25 to+55 °C , Storage:-30 to+70 °C

Ambient humidity

35 to 85 % RH, Storage: 35 to 85 % RH

Ambient illuminance

Sunlight: 10,000 #x at the light-receiving face, Incandescent light: 3,000 #x at the light-receiving face

EMC

IEC 60947-5-2, Parts7.2.6.1.2.3 or RFI>3V/m(in 30-1000MHZ), EFT>1KV, ESD>4KV(contact)

Voltage Withstand Ability

IEC 60947-5-2, Part8.3.3.4 or 500VDC for one min, between all supply terminals connected together and enclosure

Insulation Resistance

>20M  With 500v dc megger between all supply terminals connected together and enclosure

Vibration Resistance

IEC 60947-5-2, Part 7.4.2 or 10-55HZ, 1.0mm amplitude in x, y and z directions for 30 min

Shock Resistance

IEC 60947-5-2, Part 7.4.1 or 30g 11ms in x, y and z directions for six time each

Shock resistance

500 m/s2 acceleration (50 G approx.) in X, Y and Z directions for three times each

Emitting element

Infrared LED (modulated)

Red LED (modulated)

Infrared LED (modulated)

Material

PBT

Cable

0.2 mm2, 3-core (thru-beam type emitter: 2-core) oil resistant cabtyre cable, 2 m long

Cable extension

Extension up to total 100 m is possible with 0.3 mm2, or more, cable (thru-beam type: both emitter and receiver).

Weight

Emitter: 45 g approx., Receiver: 50 g approx.

50 g approx.

Housing size [mm]

M12*55

Thread size [mm]

M12*1*40

Mode

Diffuse reflection

SN [mm]

150mm

Light source

Infrared LED 880nm

Output

NPN/PNP NO/NC

Power supply

10-30VDC

Protection degree

IP67

Response time

Max 8.2ms

Hysteresis

3-20%

Repeat accuracy

5%

Load current

200mA

Residual voltage

2.5V

Consumption current

25mA

Protection circuit

Surge, reverse polarity and short-circuit

Indicator

Yellow LED

Ambient temp.

-15-55

Ambient RH

35-95%

Housing material

Nickel plated brass/ABS/PC

Connection

PVC Cable 2m